Click Fraud Monitoring Coxswains Grade 1 | Coxswain Grade 1 | Skippers Ticket

Coxswain Grade 1

Coxswains Grade 1 enrolments now online –
Click the BOOKING OPTIONS button on the right.

This course is done via correspondence and on your work site, utilising your equipment and on your vessel – or one of ours at our location.

The Coxswains Grade 1 is all 12 of the below units. The first 8 units are the Coxswain Grade 2 and then add 4 more units (plus First Aid and VHF radio Licence) to get the Coxswain Grade 1;

MARN008 – Seamanship skills aboard a vessel up to 12 metres
MARK007 – Handle a vessel up to 12 metres
MARI003 – Comply with regulations … a vessel up to 12 metres
MARJ006 – Environmental work practices
MARF028 – Follow procedures to minimise and fight fires
MARF029 – Meet work Health and Safety requirements
MARC037 – Operate inboard and outboard motors
MARF027 – Survival skills in the event of vessel abandonment
MARB027 – Servicing and maintenance of main propulsion unit and auxiliary systems
MARC038 – Operate main propulsion unit and auxiliary systems
MARF030 – Survive at sea using survival craft
MARH013 – Plan and navigate a passage for a vessel up to 12 metres

+First Aid HLTAID003 is an AMSA requirement – so you need to get this at another Training Organisation that specialises in this before you can get your Coxswain Grade 1 (you can get it after starting our course, but you must have the First Aid by the time you come to us for the final certificate).

+VHF Radio Licence is also needed before you can get your Coxswain Grade 1, and you can do this with us, either before, during or after you do the Coxswain Units. Tick this in the booking form to add it, if you don’t already have it. You cannot receive your Coxswain Grade 1 Certification until you get it.

TIME:

Theory part is Correspondence and online Study at Home. You can take up to 6 months if you need, average students take about 4 weeks, plus 1 -2 days Exams and Practical.

COST:

CLICK THIS to see the cost to you.

Easy to customise also, to add or remove items you want, or don’t want or don’t need. Useful if you have done some units elsewhere.

AMSA (Govt) COST:

There is no Oral assessment any more, this has been replaced by an AMSA Mandated Practical Assessment (AMPA) which is done by us if you want. Our senior Authorised Assessor can do the AMPA and can also give you an Interim Certificate on the spot which will allow you to get to work immediately if you pass. These are separate to the course and can be booked at the time you book your course, or booked and paid for at the end, or you can even do it at another place such as TAFE etc. You choose.
Cost is on the enrolment page.

Sea Time assessment, and processing all your paperwork plus final certificate costs are determined by AMSA. When you take the documents to the Australia Post, they charge as per this AMSA costs page. CLICK THIS to see AMSA costs.

AMSA (Govt) INFO:

1. EYESIGHT and MEDICAL

Download the:

1. Eyesight test certificate

The Eyesight test certificate form 542 lets us know that your eyesight meets the necessary standard for working at sea.

If you are colour blind, you will be restricted to working in daylight hours only.

2. Guidelines for the medical assessment of near coastal seafarers

Provide the medical practitioner with the Guidelines for the medical assessment of near coastal seafarers.

Get your eyesight tested by a qualified medical practioner, and get the practioner to complete the Eyesight test certificate for you.

If you have a current AMSA medical (Certificate of medical fitness form 303) you can use this in place of the Eyesight test certificate.

You must submit your completed form as part of your Certificate of competency application form 426.

Within the Certificate of competency application there is a declaration of medical fitness that you must complete. This lets us know that you are medically fit to work at sea.

2. SEA SERVICE

You need to show you have experience working at sea in a deck, or a deck and engineering capacity, on vessels greater than or equal to five metres long. You must have completed either:

  • 30 days on commercial vessels with a completed approved task book
  • 240 days on any vessels without a task book.

You must complete at least half of the qualifying sea service required for the certificate in the five years before the application.

If you have completed a task book you must attach a copy of the seafarer details page to your application.

If at least half of your sea service is not to seaward of sheltered waters, your certificate will be restricted to sheltered waters.

You need to submit at least one of the following as proof of qualifying sea service:

  • Record of sea service form 771
  • an approved sea service log book
  • the on board sea service record from your task book
  • a letter from the vessel operator, owner, master or chief engineer detailing your sea service.

Read more about qualifying sea service.

If you want a task book

You can get a Coxswain Grade 1 task book from us or from some registered training organisations. To order a task book directly from us, use the AMSA chargeable publications order form.

Read more about task books.

3. RTO CERTIFICATE

Complete a coxswain grade 1 course at a registered training organisation.

You will need to submit your course completion certificate or your interim certificate of competency with your Certificate of competency application form 426.

4. ADDITIONAL REQUIREMENTS

You must also hold a:

  • valid HLTAID003 Provide first aid certificate, or equivalent.
  • Short range operator certificate of proficiency, or equivalent.

If you do not hold these certificates, contact a registered training organisation.

5. AMSA FINAL ASSESSMENT

Before being issued your certificate of competency you are required to complete an AMSA mandated practical assessment (AMPA) conducted by a registered training organisationapproved by us as a final assessor. Refer to the syllabus document to find out what may be included in your final assessment.

On successful completion of the final assessment the registered training organisation may give you an interim certificate of competency that will allow you to start working immediately. To be eligible for the interim certificate of competency you must have completed your Certificate of competency application form 426 including signing the declaration.

You must submit the cover page of your completed AMPA as part of your certificate of competency application.

6. SUBMIT DOCUMENTS TO AMSA

You can complete a Certificate of competency application form 426 online or download a pdf version and then complete it.

You need to complete all sections of the form. You must:

  • respond yes or no to all questions and statements in the application form
  • complete all boxes (if the information requested is unknown or not applicable insert N/A)
  • download apdf version of the form to generate your barcode
  • print the form
  • attach copies of all required documents
  • sign the declaration
  • submit your application and pay a fee at an AMSA-contracted Australia post outlet
  • provide proof of identity when you lodge your application.

Read more about completing and submitting your application for a domestic certificate.


OTHER:

You will need internet access, your own copy (digital or hard copy) of Australian Boaters Manual, plus a Commercial vessel for the practical.

Australian Boat School abilities

Fine Print: we are not responsible for keeping an eye on AMSA, we do what we can, but part of your responsibility is to check with AMSA as they change. We provide the proper Nationally Accredited course. We will assist, but we aren’t your mum, so you need to check whether the course and the Certification and Qualification is what you need for the job you are doing.